Airlive WFP-151U Manuel d'utilisateur télécharger pdf (Page 63)

6. Web Management in WFP-151U

AirLive WFP-151U User’s Manual

Name, the name of the MFP Server. You can use this name to identify the MFP Server

when you are searching for the MFP Server by the “Server Manager” utilities.

Password, enter the password you want to change to the MFP Server. The password can

be up to 7-digit alphanumeric format. The default password is “airlive”.

Re-type Password, enter the same password for the MFP Server again.

6.4.2 Wireless Setting

If you want to use the MFP Server through wireless LAN, please set up the MFP Server

through Ethernet first and make sure your wireless LAN setting is correct. After setting the

wireless LAN, unplug the Ethernet cable and restart the MFP Server, then you can start to

use the MFP Server through wireless LAN. If the wireless configuration does not work,

please plug the Ethernet cable again, restart the MFP Server and configure the MFP Server

through Ethernet until the wireless LAN settings are correct.

You can enable/disable the wireless function and set up the wireless parameters for the

MFP Server from here. The parameters include “Function”, “Mode”, “ESSID” and “Channel

Number”. You can manually set the wireless network that you want to connect in this page

or use the “Site Survey” function to automatically search for an available wireless network

and associate with it.

Function is for user to disable, enable or let the MFP Server auto select to connect to the

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 126 127

Pas de commentaire

Airlive WFP-151U Manuel d'utilisateur Page 63